Design Cover PVC · Polyvinyl chloride · Made in Germany

Rugged protection.
Easy to look after.The PVC pool cover.

The 4-chamber hollow profile made from durable PVC – with a load-bearing capacity of up to 100 kg. Available in three colours: white, grey and solar / transparent. Reduce costs, increase safety – all at a fair price.

100 kg
Load capacity
4 chambers
Hollow profile
Bad Tölz
Made in Germany
Profile preview
3 colours
Solar / Transparent
Solar
Select a colour — the preview will update accordingly:
Configure this colour →
An overview of standard colours

Three colours. A quality.

Tap to preview. From translucent solar profiles to classic white and modern grey – every variant is of the same robust quality.

* In locations subject to high thermal stress, the use of [...], due to its higher thermal resistance, is strongly recommended. Polycarbonate (PC).
What sets him apart

Technology that convinced.

Welded profile without a visible end cap
weld

Tightly welded – with no weak points

No screw-on end caps, no adhesive, no silicone. State-of-the-art welding technology ensures an invisible, completely watertight joint.

A well-maintained pool cover at the resort
Easy to look after

Clean again in no time

The curved, smooth PVC surface allows water and dirt to run off more easily and can be cleaned effortlessly using standard household cleaning products or our special cleaner.

Translucent PVC solar profile
Solar / Transparent

Solar heat gain

The translucent solar panel allows sunlight into the pool. Solar panels can provide additional heat to the pool water when there is sufficient sunlight. The actual effect depends, amongst other things, on the location, sunlight levels, the pool itself, the weather and how the pool is used.

Design Cover PVC in three colours
Three colours

Functional & Timeless

PVC Solar, white or grey – three colours to suit any pool colour and shape.

Tested safety

Accident protection for a total load of up to 100 kg

The 13/60 profile is designed to withstand a total load of up to 100 kg. When used with a suitable surrounding support structure or handrail, the solid cover enhances accident prevention. The pool cover is not a walkable surface and does not replace the duty of supervision.

Compared with the market

What our coverage makes it better.

4-chamber profile

Greater safety thanks to 4 chambers

Four air chambers instead of the usual three – this ensures maximum buoyancy and an extra level of safety. Your pool is optimally protected when closed.

Tip: Ask about the cross-section of the profile: does it have three chambers or four?
Convex shape

Less space, less mess

Thanks to the cleverly designed convex curve, water and dirt drain away more effectively, and the wrapping radius – and therefore the space required – is significantly reduced. The benefits for you: more compact installation dimensions, less cleaning and, consequently, less stress.

Tip: The profile should have a slightly convex surface and should not be straight.
Up to 81 per cent greater wall thickness

Noticeably more robust

In the case of the comparable products we examined, we measured wall thicknesses of around 0.80 mm. In this comparison, the measured wall thickness of our profile – at up to 1.45 mm – is around 81 per cent greater than the 0.80 mm of the comparable profile examined (not a comparison with the market as a whole). A difference you can really feel.

Tip: Ask your specialist retailer for a sample and compare them.
Welded ends

Tightly welded

Others glue or seal the end caps of their profiles with silicone – the classic weak point where water can seep in, leading to the growth of algae. We use a state-of-the-art process to weld them securely and permanently: completely watertight, durable – and in a colour that matches too.

Tip: Take a close look at the end caps: do they match in colour, and is there any silicone used?
Profile clip

Individual profiles can be easily swapped

If a profile becomes damaged, simply replace that one component – without having to laboriously bend back the cover at the joints. This saves time, money and hassle, and protects the product.

Tip: Take a close look at the joints between the profiles: do they have profile clips, or are they simply hooked together?
3
Manufacturer’s warranty

Three years—for specialist partners and commercial customers.

Manufacturer’s warranty for specialist partners and commercial customers: 3 years on the Design Cover PVC—up to 5 years depending on the material (Design Cover PC 5, Mini Cover 2 years) in accordance with our warranty terms. Custom-made in Bad Tölz, sturdy and durable. Private customers: your specialist partner is your point of contact and can handle warranty claims with us; your statutory warranty rights vis-à-vis your seller remain unaffected. Because we don’t just talk about our quality—we stand behind it.

Tip: Ask your specialist partner about the warranty terms for your project—they know your pool cover and handle warranty claims with us.
Evaporation & heating costs

Evaporation is the biggest Heat thieves.

Most of the energy is lost through the open water surface: evaporation is the mechanism involved the largest proportion of heat loss of a swimming pool. Every litre that evaporates carries heat away – and must be replaced by adding more hot water and topping up the pool.

A tight-fitting cover prevents exactly that. It keeps heat, water and chemicals in the pool – day and night. The extent of this effect depends on the specific pool, its location and how it is used.

Potential savings

The extent of the potential savings depends on the specific pool, its location and how it is used. We offer a bespoke model calculation Energy Check.

Where does the heat from an open-air swimming pool go?
Evaporationthe largest share
Radiation & Convectionaverage proportion
Pool walls & floorsmaller proportion

This is exactly where the cover comes in: it seals the water’s surface and significantly reduces the biggest source of loss.

Qualitative overview – the extent of the potential savings depends on the specific pool, location and usage patterns. Our Energy Check provides a bespoke model calculation.

Pool covered by Design Cover PVC
covered · heat stays in
With or without a cover

The heat stays in the pool.

Evaporationsignificantly lower
Heat loss at nightlow
Heating costslower
Dirt & Chemicalslower

Qualitative overview – the extent of the potential savings depends on the specific pool, its location and usage patterns. Our Energy Check provides a personalised model calculation. A pool cover primarily reduces evaporation, which is the greatest source of heat loss from a pool.

100 kg
Load capacity – safety for children and pets
60 °C
Temperature-resistant – retains its shape up to approximately 60 °C
4
Chambered hollow profile – excellent insulation
Bad Tölz
Made in Germany – direct from the manufacturer
Product details

The very highest standards of safety, insulation and design.

MaterialPolyvinyl chloride (PVC)
Profile4-chamber hollow profile
Dimensions13 / 60 mm · up to 100 kg total load
Hail classificationcurrently undergoing a re-audit
CareCommercially available cleaning products
Manufacturer’s warranty3 years for specialist partners and commercial customers
ColoursSolar/Transparent · White · Grey
Design Cover PVC – transparent, white and grey
Durable PVC – excellent thermal insulation, high security and easy maintenance at an attractive price.
Your next step

Her look. Your savings.

Set up your Design Cover PVC in just a few steps – free of charge and with no obligation, direct from the manufacturer in Bad Tölz.

Design Cover PVC – the robust PVC pool cover

The Design Cover PVC is the attractively priced slatted pool cover from Rollo Solar. It combines excellent thermal insulation with a high level of safety and easy maintenance – manufactured from durable polyvinyl chloride at our factory in Bad Tölz.

The 4-chamber hollow profile 13/60

At its heart lies the 4-chamber hollow profile 13/60. The fourth air chamber provides additional buoyancy and greater safety, whilst the enclosed air chambers insulate the water particularly well – heat remains in the pool and evaporation is reduced.

Tested safety

Test reports in accordance with NF P 90-308 are available for selected versions of the Design Cover PVC. The 13/60 profile is designed for a total load of up to 100 kg; when fitted with a suitable perimeter support or handrail, the closed cover enhances accident prevention. The hail resistance classification of the relevant profiles is currently undergoing re-audit. The pool cover is not a walkable surface and does not replace the duty of supervision.

Insulation and easy maintenance

A surface-mounted cover reduces evaporation – the greatest source of heat loss from a pool – and keeps out leaves, pollen and dirt. This reduces heat loss and the ingress of chemicals; the extent of the potential savings depends on the specific pool, location and usage patterns. The smooth PVC surface is also easy to clean.

PVC or polycarbonate?

The Design Cover PVC is the robust, more cost-effective option. The Design Cover PC made from polycarbonate is more impact-resistant, longer-lasting and available in metallic finishes. Our product comparison provides a direct comparison; the most affordable entry-level solution is the Mini Cover.

Quality from Bad Tölz

Custom-made profiles from Bad Tölz – manufacturer’s warranty for specialist partners and commercial customers: 3 years on all PVC Design Cover products.

Frequently asked questions about the Design Cover PVC

How do PVC and polycarbonate profiles differ?

PVC is robust and more affordable, with very good insulation. Polycarbonate is more impact-resistant, particularly durable and available in metallic finishes.

How safe is the Design Cover PVC?

The 13/60 profile is designed to withstand a total load of up to 100 kg; test reports in accordance with NF P 90-308 are available for selected models. The pool cover is not a walkable surface and does not replace the duty of supervision.

Can the cover withstand hail?

The hail classification of the relevant profiles is currently undergoing a re-audit. Once the test is complete, the updated entry will be made in the relevant hail registers.

What warranty applies?

For specialist partners and commercial customers, a 3-year manufacturer’s warranty applies to all PVC Design Covers (subject to warranty terms and conditions). Private customers: your specialist partner is your point of contact and can handle warranty claims with us.